Post by Neisteadt on Oct 25, 2010 21:50:05 GMT -5
General Rules:
All entries must be rear wheel drive only. All cars must have 4-wheel independent suspension. No straight axle cars allowed, single speed transmissions only. All bodies must resemble contemporary, full scale cars. All corners of bodies should be rounded for safety.
All drivers must corner marshal following each event, per club rules.
Any car that is severely damaged, which includes, but is not limited to, missing a tire and/or wheel (missing the left front may be excused, as long as the car does not have components dragging on carpet), has a loose body, is dragging chassis components or is dragging body parts must be removed from the track.
Any car that is not up to speed or in uncontrollable, in such a manner that it is creating a hazard to other drivers, must be removed from the track.
Car:
1/10 Scale Sprint Car with roll cage.
No direct drive cars.
At least a top wing must be used, and must stay on car for duration of race.
TIRES:
Foam or rubber tires.
Any tire additives that are used must be wiped clean from the tires before any races or practice sessions.
BATTERY:
Maximum of 6 sub-C rechargeable batteries (1.2V per cell maximum) or 2 cell lipo battery pack (7.4 V max).
A lipo sack is mandatory for all lipo charging. All racers shall take every other precaution to ensure safe charging and discharging techniques.
To ensure safe charging methods are followed by all competitors, all batteries will be checked prior to each race to ensure battery voltage is a maximum of 8.44 volts or less. If the battery reads 8.45 or more you do not race. Battery temperature may also be checked, and must be within 15 degrees (F) of room temperature. Batteries outside of that temperature range will not be allowed to race.
Motors:
The largest motors allowed for this class will be any ROAR approved 17.5 motor. All motors must be ROAR approved.
Motor Temperature may not be 15 degrees (F) or colder than room temperature at the start of the race. Tech officials may check that temperature prior to the event. Motors found in violation will not be allowed to race. In summary, no freezing of motors to create a performance advantage will be allowed.
All entries must be rear wheel drive only. All cars must have 4-wheel independent suspension. No straight axle cars allowed, single speed transmissions only. All bodies must resemble contemporary, full scale cars. All corners of bodies should be rounded for safety.
All drivers must corner marshal following each event, per club rules.
Any car that is severely damaged, which includes, but is not limited to, missing a tire and/or wheel (missing the left front may be excused, as long as the car does not have components dragging on carpet), has a loose body, is dragging chassis components or is dragging body parts must be removed from the track.
Any car that is not up to speed or in uncontrollable, in such a manner that it is creating a hazard to other drivers, must be removed from the track.
Car:
1/10 Scale Sprint Car with roll cage.
No direct drive cars.
At least a top wing must be used, and must stay on car for duration of race.
TIRES:
Foam or rubber tires.
Any tire additives that are used must be wiped clean from the tires before any races or practice sessions.
BATTERY:
Maximum of 6 sub-C rechargeable batteries (1.2V per cell maximum) or 2 cell lipo battery pack (7.4 V max).
A lipo sack is mandatory for all lipo charging. All racers shall take every other precaution to ensure safe charging and discharging techniques.
To ensure safe charging methods are followed by all competitors, all batteries will be checked prior to each race to ensure battery voltage is a maximum of 8.44 volts or less. If the battery reads 8.45 or more you do not race. Battery temperature may also be checked, and must be within 15 degrees (F) of room temperature. Batteries outside of that temperature range will not be allowed to race.
Motors:
The largest motors allowed for this class will be any ROAR approved 17.5 motor. All motors must be ROAR approved.
Motor Temperature may not be 15 degrees (F) or colder than room temperature at the start of the race. Tech officials may check that temperature prior to the event. Motors found in violation will not be allowed to race. In summary, no freezing of motors to create a performance advantage will be allowed.